MonoAmp

MonoAmp systems are 3-Way OR 2-Way systems equipped with a Klipsch Passive Processor that allows the three system components (High Frequency/Mid Frequency/Low Frequency sections) OR two system components (High Frequency/Low Frequency sections) to be powered by one amplifier channel. 

This system type is typically the most economical since both the number of wire runs and amplifiers used are the least.  This system type is also the easiest to both initially setup and to setup if the amplifier needs replacement since no amp re-settings are required. 

Advanced Klipsch Passive processors used in MonoAmp models also account for impedance differences allowing the user to select the power amplifier that typically would be used for the LF section to pass the correct power to all system components.

KPT-435 B/M

KPT-435 B/M

3-WAY SMALL TO MEDIUM AUDITORIUM SYSTEM WITH BUILT-IN BI-AMP OR MONO-AMP OPERATION

As the first full three-way passive behind-the-screen system on the market the KPT-435-B affords the ultimate in audio performance for small- and medium-sized venues.

  • Less than 20-inches in depth
  • Dual 15-inch bass unit
  • Two-inch throated compression driver
  • K-703 horn with a 1.75-inch titanium diaphragm
  • Bi-amp OR Mono-amp configuration
KPT-335-B/M

KPT-335-B/M

3-WAY SMALL AUDITORIUM SYSTEM WITH BUILT-IN BI-AMP OR MONO-AMP OPERATION

Unlike many three-way behind-the-screen systems the KPT-335-B is 12.25 inches in depth making it one of the most compact performers in its class. Engineered to save space and deliver superior sound to smaller-sized venues the KPT-335-B serves as a high-output single 15-inch three-way system. It features the KPT-315-LF for enhanced bass output and the same KPT-335 HF/MF configuration as the larger KPT-435-B for the critical dialogue range.

Choose bi-amp or mono-amp configuration by simply changing the wiring of the crossover network.

  • High-output single 15-inch three-way system
  • 12.25 inches in depth
  • Bi-amp OR Mono-amp configuration
KPT-535/4-M

KPT-535/4-M

The KPT-535/4-M is perfect for larger venues with limited behind the screen space. An enhanced version of the KPT-535-T with a KPT-415-LF quad 15-inch direct-radiating bass unit, it produces higher output in large auditoriums while still retaining a shallow 24-inch depth. Its three-way design with its mono-amp configuration using a passive crossover system minimizes amplifier numbers while significantly reducing wire runs and labor time.

Dialogue is flawlessly reproduced with a KPT-402-MF Tractrix® Horn fronting a K-1133 two-inch exit titanium compression driver. And a KPT-Grand-HF-T Tractrix® Horn ensures smooth effortless treble reproduction

KPT-535-M

KPT-535-M

Perfect for medium to large auditoriums, the KPT-535-M utilizes the KPT-904/940-LF double 15-inch low frequency system for clean, powerful output in a system that is still only 24 inches in depth.

The KPT-402 mid-bass Tractrix® Horn coupled to the Klipsch K-1133 two-inch-exit titanium compression driver precisely reproduces even the softest dialogue with perfect clarity. The high frequencies are easily handled by the Grand-HF-T Tractrix Horn.

KPT-904-M

KPT-904-M

An excellent sounding system designed for mid-sized screens and especially suited for stadium seating, the KPT-904-M not only is remarkably priced, its mono-amp configuration also keeps electronic and wiring costs in check.

  • 3-inch Titanium diaphragm compression driver
  • Dual 15-inch woofer low frequency cabinet
  • Mono-amp configuration
KPT-902-M

KPT-902-M

ECONOMICAL 2-WAY MONO-AMP SYSTEM FOR SMALL TO MEDIUM AUDITORIUMS

The KPT-902-M is an excellent entry-level 2-way system for small to medium auditoriums where cost effectiveness is a primary objective. Its sophisticated passive processor allows for a single amplifier operation and the minimal wiring runs associated with it, while still providing legendary Klipsch dynamic sound.

  • 1.75-inch Titanium diaphragm compression driver
  • Dual 15-inch woofer low frequency cabinet
  • Mono-amp configuration
KPT-325-M

KPT-325-M

Engineered to both reduce costs and save space, the new KPT-325-M is only 12-inches in depth.

  • Single 15-inch woofer enclosure
  • Tractrix® Horn/3-inch Titanium diaphragm compression driver produces more output with less energy
  • Mono-amp configuration

The system features the KPT-315-LF single 15-inch woofer enclosure coupled with the KPT-904-HF Tractrix® Horn. Amazingly this compact combination delivers the same frequency response as the KPT-904-B system. The KPT-325-M is also available for a bi-amp configuration (KPT-325-B).

KPT-310-M

KPT-310-M

ECONOMICAL 2-WAY MONO-AMP SYSTEM FOR SMALL AUDITORIUMS

Legendary Klipsch cinema sound in an economical, mono-amp operation system designed for small auditoriums.

  • 1.75-inch Titanium diaphragm compression driver/Tractrix® Horn
  • Single 15-inch woofer enclosure
  • Mono-amp configuration
KPT-942-M

KPT-942-M

2-WAY BEHIND THE SCREEN CINEMA SYSTEM

For high output combined with excellent coverage the system uses a KPT-402-HF Tractrix® Horn with a K-1132 two-inch exit titanium compression driver to reproduce middle and high frequencies. The KPT-942-M is also available without a passive crossover for bi-amplification as the model KPT-942-B.

  • Dual 15-inch bass unit
  • Tractrix® Horn with a two-inch exit titanium compression driver
  • 24 inches deep
  • Bi-amp configuration
KI-398-RGL

KI-398-RGL

HIGH OUTPUT 2-WAY VERTICAL LINE ARRAY SYSTEM

The Klipsch KI-398-RGL is a full-range 22.5° trapezoidal design ideally suited for use as a vertical line array in a behind the screen cinema system. The loudspeaker has incredible output capability featuring a 15" high excursion cast frame woofer, large format 3" titanium compression driver and internal high-current full-range crossover.